Centrifuge Beautyhall DIGITAL

Overview

Beautyhall DIGITAL is a compact benchtop centrifuge for professional use in a beauty clinic. The device is designed for centrifugal separation of blood into fractions and for preparing PRP and PPP material for further procedures.

The model is practical for daily work: speed and time are set from the display, the timer automatically completes the cycle, and the built-in sensor monitors rotor balance. This supports stable, safe and predictable sample preparation.

Indications

Preparation of PRP and PPP material for beauty protocols, mesotherapy, microneedling, biorevitalization and procedures requiring controlled centrifugal separation of blood into fractions.

Application

1. Place the centrifuge on a flat, stable surface at least 10 cm away from the wall.
2. Prepare the sample tubes and always balance them in pairs: equal fill level and symmetrical placement in the rotor.
3. Close the lid and connect the device to the power supply.
4. Set speed and time with the SPEED and TIME buttons according to the protocol. For standard PRP, 3000-3500 rpm for 5-10 minutes is commonly used as a guideline.
5. Press ON. The timer starts after the selected speed is reached.
6. After automatic stop, press OFF, wait until the rotor fully stops and only then open the lid.

Benefits

• Works with 10 ml tubes without additional adapters.
• The display allows accurate speed and time settings.
• Automatic timer ends the cycle without manual monitoring.
• Imbalance sensor increases operating safety.
• Compact body and noise level below 70 dB are convenient for clinic use.

Technical Specifications